10:1 – ACRALOCK FA10 Series

ACRALOCK FA10 Series (Component A) adhesives were designed to be flexible and formulated with several working time ranges, when mixed at 10:1 ratio with one of the prescribed activators (Component B). The FA10-05A, FA10-10A and FA10-20A and FA10-30A are all progressively all longer in working time and fixture time, respectively. These products are designed for best combination of low boiling tendencies, low exotherm, low shrinkage, and a high degree of flexibility with moderate strength to adhere to assemblies of thermoset composites and plastics and are formulated to be primerless on most metal surfaces.

ACRALOCK adhesives, manufactured by Engineered Bonding Solutions, LLC., are packaged in 490mL dual cartridges as well as 5- and 50-gallon containers for application with meter-mix dispensing equipment.

KEY FEATURES

  • Highly ductile adhesive, low read-through
  • Easy 10:1 mix ratio
  • Primerless on most metals
  • Working time options from 5min up to 35 minutes
  • 800-1500 psi shear strength and flexible after 82°C oven post cure
  • Little to no surface preparation
  • Excellent fatigue characteristics and shock load resistance
  • Stable formulations with shelf-life of 9 months

CURED PHYSICAL PROPERTIES

Property Typical Values psi (MPa)
Tensile strength 1,000-1,500 (10.3)
Modulus kpsi 20-30 (207)
Elongation (%) Flexible (50 – 80)
Lap Shear Aluminum, ASTM D1002 900-1,200 (8.3)
Lap Shear Stainless, D1002 800-1,400 (9.7)
Lap Shear Cold Rolled Steel, D1002 800-1,400 (9.7)
Lap Shear Pultrusion-FRP psi, D5868 900-1,500 (10.3)

All tensile and lap shear properties are based on a cure cycle of 24hr @ RT followed by 1hr post-cure @ 179.6 °F.